Water Resistance - gc 1 Open Dial Limited Edition Manual De Instrucciones

gENEral INformatIoN
winding
The Gc-1 Open Dial is equipped of a high-quality mechanism with automatic winding. With the slightest
movement of your wrist, a silent rotor conveys power to the spring. When it is fully wound, the minimum
power reserve is 42-hours. If it has not been worn recently, we recommend winding your Gc-1 Open Dial
manually by winding the crown to position 1.
screw Down
The Gc-1 Open Dial has a screw down crown. It is important to screw it in correctly and fully after each
adjustment to ensure that the watch remains water resistant. Do not pull the crown unless it is unscrewed
first. Unscrew the crown counter-clockwise (towards you) until it turns freely without tension and then pull
the crown out to desired position for watch settings. After time change, push the crown to position 1, keep
it in this position and turn it clockwise. Screw it down until it is secure.

water resistance

Your Gc-1 Open Dial is water resistant to 100 Meters (10 ATM/330 feet of pressure). If exposed to salt or
chemical water, please rinse the watch with fresh water and wipe with a soft, dry cloth.
6
how Do I takE carE of my gc tImEpIEcE?
wearing: It is preferable to avoid wearing your Gc-1 Open Dial to the beach, or while playing extreme
sports, so as to avoid knocking or scratching them. Repeated contact with perfumes, cosmetics, or
household detergents may damage your timepiece.
cleaning of the case & buckle: Make sure the crown is screwed down so that the movement is protected
from water. Put only the case and buckle in warm water and add a little mild liquid detergent, and lightly
brush with a soft toothbrush. Finally rinse with warm water and pat dry with a soft cloth. Professional
cleanings are recommended as often as once a year.
7