Hardware Installation; Driver Installation - Intellinet 509510 Manual Del Usario

PCI Network Card • User Manual
Thank you for purchasing the INTELLINET NETWORK SOLUTIONS
PCI Network Card, Model 509510, or 10/100 Low Profile PCI Network Card,
Model 515207. For specifications, go to www.intellinet-network.com.

HARDWARE INSTALLATION

1. Turn off your computer,
disconnect the power
and remove its cover.
2. Remove the metal cover
plate on the back of an
available PCI slot.
3. Insert the card into the
slot and use the bracket
screws to secure it
firmly in place.
4. Replace the cover on the computer.
5. Re-connect the power.
6. Connect the card to the desired network device.

DRIVER INSTALLATION

Windows 2000, XP, 2003, Vista and 7 automatically detect and install the card
with a built-in driver when the system is booted up. NOTE: For other systems,
a driver CD is included.
TO VERIFY DRIVER INSTALLATION
Go to Control Panel on your Windows desktop, then System Properties. Click
on "Device Manager. " If the card is listed under "Network Adapters" as shown
below, the driver installation was successful.
• In Windows 2000 — "Realtek RTL8139(A) PCI Fast Ethernet Adapter"
• In Windows XP/2003 — "Realtek RTL8139 Family PCI Fast Ethernet NIC"
• In Windows Vista/7 — "Realtek RTL8139/810x Family Fast Ethernet NIC"
2
ENGLISH
Fast Ethernet
™
Link/Activity LED
English
RJ45 jack