Furniture Moving & Placement Guide; Notes - LAZBOY Gold Luxury-Lift Instrucciones De Operación

Furniture Moving & Placement Guide
Moving the Gold Lift Chair
WARNING
– To reduce the risk of burns, fire, electric shock,
serious injury or death:
• Before moving a Gold or Silver Series chair, disconnect the electrical plug from the wall
outlet. Moving the chair requires two people, one on each side of the chair lifting the frame
near the base. Secure the mechanism as shown to prevent unexpected opening or movement.
Only move the product by the lower frame, never by the legrest, arms or reclining back.
Moving the Gold lift chair requires two people, one on each side of the chair. The back can
be removed, by reversing the Assembly Instructions for handling ease.
1. Unplug the power supply from the electrical outlet.
2. Disconnect the 120 volt power cord from the power supply, and disconnect the power supply
from the power supply connector at the base of the unit. Refer to the Assembly Instructions.
3. Secure hand wand by placing it between the back and seat.
4. Have two people stand beside the chair (one on each side), grip the lower arm frame and carefully
tip the unit forward, bringing it to a rest on the front arms and top of the back (if attached).
5. Secure mechanism by attaching a cable tie around the two lower rear bottom rails as shown below.
Return recliner to its upright position.
6. Have two people stand to the side of the chair (one on each side) and grip the lower arm frame to
lift and move the chair.
Important: If a hand truck is used, only use from the back of the chair, never from the front of the
Tuck Hand
Wand
Between
Back and
Seat
Furniture Placement
WARNING
– To reduce the risk of serious injury:
• Provide a clear path for operation of the back and legrest. Place tables and area rugs
at a distance to allow the legrest to fully extend without rubbing or interference.
To place your reclining unit the proper distance from
the wall, fully recline the unit and leave a minimum of
2" of space between the top of the back and the wall.
Place tables and area rugs at a distance to allow the
legrest to fully extend without rubbing or interference.
24
Lower Rear Bottom Rails
Grip Lower Arm Frame
chair.

Notes:

25