iio VR1 Instrucciones De Uso Y De Mantenimiento página 12

Bottle Holder Shelf
• The bottle holder is used to hold bottles and cans and can be positioned on the
• To reposition the bottle holder shelf, place one hand on the back of the shelf and
• Slightly tilt the front of the shelf up to completely pull out the shelf.
• Gently re-install the shelf at the desired position by reversing these steps.
• Ensure that the shelf is gently pushed towards the back of the refrigerator and
Door Shelves and Wire Holders
• The door shelves are typically used to hold smaller items.
• Each door shelf includes a metal bottle holder that may be removed by lifting it
• Several door shelf position locations are available, allowing the shelves to be
• Door shelves may be removed for cleaning.
• Gently lift up the shelf using both hands placed on both ends of the shelf. Lift
• Re-install the shelf ensuring that it is lowered evenly and horizontally. Gently tap
Crisper Drawer
• The crisper is typically used to hold vegetables and fruit and may be pulled out
CAUTION
Exercise care when moving shelves, drawers, and door shelves to avoid breakage.
Upper Freezer Bin
• The upper freezer bin is used for storing frozen food and for freezing fresh food.
• Ensure the freezer bin door is completely closed to prevent ice build up and ensure proper
functioning of the door.
glass shelves.
one at the front of the shelf. Gently lift the back of the shelf up, above the slots
where they are seated and carefully pull the shelf out towards you.
that the tabs on either side of the shelf are properly seated in their slots located
at the back of the refrigerator.
up.
easily repositioned.
both sides evenly to avoid jamming or causing damage to the shelf or refrigerator
panel.
the tray to ensure it is properly seated.
for cleaning.
12