Nevir NVR-4603 6P 12C Manual De Instrucciones página 38

1.Power indicator and Button: To turn on/off and show
the power supply.
2. Program Selector : Turn the knob to selector cycles.
3. Plus indicator : To be on when selected the Plus function.
4. Half load indicator : To be on when selected the half load
function.
5.Delay indicators: to show the delay time (3h/6h/9h )
6.Rinse aid warning lights: To be of when dispenser need
to be refilled
7.Salt warning lights: To be on when the salt container
need to be refilled
8.Running indicator : To show the state of the dishwasher.
Front view
1
2
3
4
5
1
Upper Basket
2
Inner pipe
3
Lower Basket
To get the best performance from your dishwasher, read all operating instructions
before using it for the first time.
Intensive Glass
Normal 90 Mins
Rapid
ECO
4
Salt Container
5
Dispenser
6
Cup Shelf
9. Extra Drying button:Select Extra Drying function(
not be used with Rapid )
10.Half load functions Button: To select Half load
function. (With the Half load function you can
only use it when you have only about or less than
6 place setting dish wave, and you will see less
water and energy consumption , can only be used with
Intensive, Normal, ECO,Glass and 90Min .)
11.Delay Button : To Press the button to delay.
12.Start /Pause Button: To start the selected
washing program or pause the washing program
when the machine is working.
6
7
8
9
7
Spray arms
8
Filter assembly
9
Inlet pipe connector
eco
;
Back View
10
Drain pipe
can
10