Nevir NVR-4603 6P 12C Manual De Instrucciones página 54

When some malfunctions come on, the appliance will display error codes to warn you:
The 9h light flicker fleetly
The 6h and 9h light flicker fleetly
The 3h light flicker fleetly
The dishes were not
loaded correctly.
The program was
not powerful enough.
Not enough detergent
was dispensed.
Items are blocking
the path of sp ay arms. r
The filter combination
in the base of wash
cabinet is not clean or
is not correctly fitted.
This may cause
the sp ay arm jets r
to get blocked.
Combination of soft
water and too much
detergent.
Aluminum utensils
have rubbed against
dishes.
Dishes block
detergent cups.
Improper loading
Too little rinse-aid
Dishes are removed
too soon
Wrong program
has been selected
Use of cutlery with
a low-quality coating
Longer inlet time.
Not reaching required temperature.
Overflow.
If overflow occurs, turn off the main water supply before calling a service.
If there is water in the base pan because of an overfill or small leak,
the water should be removed before restarting the dishwasher.
See notes in " Loading the Dishwasher Baskets ".
Select a more intensive program.
See" Wash Cycle Table . "
Use more detergent, or change your detergent.
Rearrange the items so that the sp ay can rotate freely.
Clean and/or fit the filter combination correctly.
Clean the sp ay arm jets. See "Cleaning the Spray r
Arms".
Use less detergent if you have soft water and select
a shortest cycle to wash the glassware and to get
them clean.
Use a mild abrasive cleaner to eliminate those marks.
Re-loading the dishes properly.
Load the dishwasher as suggested in the directions.
Increase the amount of rinse-aid/refill the rinse-aid
dispenser.
Do not empty your dishwasher immediately after
washing. Open the door slightly so that the steam can
escape. Begin unloading the dishwasher only once t
he dishes are barely warm to the touch. Empty the low
basket first. This prevents water form dropping off
dishes in the upper basket.
In short program the washing temperature is lower.
This also lowers cleaning performance. Choose
a program with a long washing time.
Water drainage is more difficult with these items.
Cutlery or dishes of this type are not suitable for
washing in the dishwasher.
Faucets is not opened, or water intake is
restricted,or water pressure is too low.
Malfunction of heating element .
Some element of dishwasher leaks .
r