Pleasant Hearth OFW760R Manual De Instrucciones página 5

ASSEMBLY INSTRUCTIONS
2. Attach legs (E) to the upper support ring (D)
by inserting M6x20mm bolts (AA) through pre-
drilled holes in legs (E) and upper support ring
(D) and secure with M6 nuts (CC) as illustrated.
Tighten all bolts and nuts including those from
the previous step with Phillips screwdriver and
wrench (DD).
Hardware Used
M6x20mm Bolt
AA
CC M6 Nut
DD Wrench
EE
3. Attach ash catcher (I) to the fire bowl (C) us-
ing M6x12mm bolts (BB) and M6 nut (CC) as il-
lustrated. Tighten the bolts and nuts with Phillips
screwdriver and wrench (DD).
Hardware Used
BB M6x12mm Bolt
M6 Nut
CC
Wrench
DD
EE
EE
4. Place fire bowl (C) into fire bowl holder.
2
D
E
x8
x 8
3
BB
x3
C
x3
I
4
C
5
AA
CC
CC