Declaration Of Conformity - Beta 3033/3T Instrucciones

INSTRUCTIONS FOR USE
LOWERING VEHICLE
- Lift the vehicle until it is released from the stands.
- Remove the stands.
- Lift the operating lever and turn it clockwise, making sure that nobody is in a dangerous
position while the vehicle is being lifted and lowered.
- Do not place your hands or feet, or any object on the lever of the lifting arm while the vehicle
is being lifted and lowered.
MAINTENANCE
The moving parts of the hoist should be periodically checked, since dirt, rust etc. may result
in slower or nonhomogeneous movements. Proper lubrication is an essential requirement for
hoists to run correctly. Therefore, the bearings of the steering wheels should be periodically
checked, making sure that the piston is in excellent condition, in terms of both cleaning and
lubrication. Clean with a an oil-soaked cloth, if need be. When the hoist is not used, keep it
completely down.
If the hoist does not complete its travel while the vehicle is being lifted, check the oil level.
If a hydraulic hoist is damaged, worn, does not run correctly or is believed to have been
overloaded, "IT SHOULD NOT BE USED UNTIL IT HAS BEEN REPAIRED". The owners
and/or operators should be aware that repairing the product requires specialist skills
and facilities. Only components and labels authorized by the parent company should be
used on this hoist.
For further information, please contact the BETA customer service.
MOUNTING LEVER
Fit the "T" lever into the slot; match the two holes and join the parts together by means of the
supplied bolts.

DECLARATION OF CONFORMITY

BETA UTENSILI S.p.A hereby states that hoist 3033/3T complies with "Machine Directive"
2006/42/EC. EN 1494/A1:2008.
MASSIMO CICERI
( Managing Director)
EN
5