Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

The A/A-AC8™ eight-channel amp controller provides the means for a MediaMatrix
control up to eight amplifier channels. With MediaMatrix
amplifier's load current and load voltage, determine the operational status of the amplifier, and control the
amplifier's power on/off. Communications between the A/A-AC8 and the MediaMatrix system are accomplished
via a proprietary serial communications protocol over industry standard RS-485, which can operate up to lengths
of 4,000 feet.
Note: An RS-485 communications card is required in the MediaMatrix—contact Peavey Architectural Acoustics®
tech support for more information.
Communications between the A/A-AC8 and an amplifier are accomplished through a standard 8-conductor
RJ-45 telephone-type cable. The A/A-AC8 will communicate with any Peavey amplifier equipped with an ACI
module or an IDC
150TII.
Front Panel:
1
2
FRONT PANEL FEATURES
POWER LED (1)
Illuminates when unit is on.
NETWORK LED (2)
Illuminates when there is communication activity on the RS-485 network.
Rear Panel:
4
5 a
3
REAR PANEL FEATURES
AC LINE CORD SOCKET (3)
Provided to accept the removable AC line cord.

POWER SWITCH (4)

Switch to "On" position to turn on. The red Power LED will illuminate indicating power is being supplied to the unit.
E N G L I S H
5 e
5b
6
5d
5 c
3
®
amp control software, the A/A-AC8 will monitor an
7
®
system to monitor and
8
9
-2

Publicidad

loading