Dahle 00210 Manual De Instrucciones página 6

1
en
Instructions
ATTENTION!
Read the operating and safety instructions
carefully BEFORE putting the BSM DAHLE
210 into operation.
You must follow the instructions.
Keep the operating instructions in a safe
place ready for later use.
Table of contents
1 Important information . . . . . . . . . . . . . . . . 6
1.1 Intended use,
warranty . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1.2 Safety instructions . . . . . . . . . . . . . . . . . . . 6
1.3 Technical data . . . . . . . . . . . . . . . . . . . . . 6
1.4 Key to pictograms . . . . . . . . . . . . . . . . . . . 7
1.5 Scope of supply . . . . . . . . . . . . . . . . . . . . 60
1.6 Device overview . . . . . . . . . . . . . . . . . . . . 60
1.7 Optional settings . . . . . . . . . . . . . . . . . . . 61
2 Operation . . . . . . . . . . . . . . . . . . . . . . . . 62
2.1 Connecting the BSM DAHLE 210 . . . . . . . . 62
2.2 Sharpening pencil . . . . . . . . . . . . . . . . . . 62
3 Maintenance . . . . . . . . . . . . . . . . . . . . . . 63
3.1 Emptying the waste container . . . . . . . . . . 63
3.2 Cleaning the device . . . . . . . . . . . . . . . . . 63
3.3 Replace cutting unit . . . . . . . . . . . . . . . . . 64
1.1
Intended use, warranty
The sharpener BSM DAHLE 210 is intended exclusively
to sharpen lead and coloured pencils.
The lead and coloured pencils must not have a larger
diameter than specified.
Wear and damage due to improper use or unauthor-
ised modifications and repairs are not covered by the
warranty or the guarantee.
1.2
Safety instructions
- Do not place the device near a source of heat!
- The device must only be operated in an upright
position!
- Only operate the device in closed spaces, at tem-
peratures between 10 °C and 25 °C and at a non-
condensing humidity between 15% and 95%.
- The device is not intended for use by persons
(including children) with restricted physical, senso-
ry or mental capabilities or a lack of experience and
knowledge, unless they are working under supervi-
sion or receive detailed instruction about how to
use the device from a person who is responsible for
safety.
- Clean the housing with a soft, dry cloth and/or
brush.
- Ensure the device is standing securely.
- Only operate the device with the provided docking
station (see 1.6 "C") of the BSM DAHLE 210.
- Ensure that the building installation has short-
circuit protection: max. 16 A (US max. 20 A).
- Do not use near caustic substances.
- Do not use near inflammable liquids or gases.
- Do not subject to moisture.
- Keep spray cans away from the device.
1.3
Technical data
Subject to technical modifications!
Dimensions: H 205 mm x Ø 105 mm
Weight: 670 g
Operating noise level: 69.5 dB
Device supply voltage: 9 V DC, 1000 mA
Supply voltage of power supply unit:
100–240 V AC, 50/60 Hz, 0.5 A
6