Publicidad
Idiomas disponibles
Idiomas disponibles
INTRODUCTION
First of all, we thank and congratulate you for purchasing this product
manufactured by
Golmar.
Our commitment to achieving the satisfaction of customers like you is
manifested through our ISO-9001 certification and the manufacture of
products like the one you have just purchased.
Its advanced technology and strict quality control will ensure that
customers and users enjoy the numerous features that this device
offers. To get the most out of them and ensure proper operation from
day one, we recommend that you read this instruction manual.
SAFETY PRECAUTIONS
-
Do not overtighten the telephone fixing screws.
-
Always disconnect the power supply before
the device.
-
The fitting and handling of these devices must be carried out by
authorised personnel.
-
All of the wiring must run at least 40cm away from any other wiring.
-
Install the telephone in a dry protected location free from the risk of
dripping or splashing water.
-
Do not place in humid, dusty or smoky locations, or near sources of heat.
-
Before connecting the device to the mains, check the connections
between the door panel, power supply and telephones.
-
Always follow the instructions contained in this manual.
CHARACTERISTICS
-
Telephone for Uno installation.
-
Telephone with 4 common wire installation.
-
Function button.
-
Totally private conversation.
-
Apartment front door call input.
-
Call to main guard unit.
-
Different ringtones to identify call origin:
Door panel, guard unit and interior door of apartment "HZ".
-
Door release button.
OPERATION
-To make a call, the visitor presses the button for the apartment, a number
of audible tones indicate that the call is being made and LED
door panel illuminates. At this moment, the apartment's telephone
receives the call. If the visitor presses the button for another apartment
by mistake, the call can be cancelled by pressing the button for the
correct apartment.
-In systems with several access doors, the other door panel(s)
automatically disconnects. If another visitor attempts to call, a number
of telephone tones will indicate that the channel is busy and LED
the door panel will illuminate.
-General entrance door panels (mode EL501): If the call is being made
from the general entrance door panel, the interior door panel of the
building being called and other possible general entrance door panels
automatically disconnect. If another visitor attempts to call from either a
busy interior door panel, a number of telephone tones will indicate that
the channel is busy and LED
of the door panel will illuminate, or from
OPERATION
1
Continued from previous page
another general entrance door panel, a number of telephone tones will
indicate that the channel is busy and LED of the general entrance door
panel will blink for 3 seconds. The door panels of the other interior
buildings will remain free to be used.
-General entrance door panels (mode EL501): If the call is made from an
interior door panel, the other interior door panels will remain free to be
used. It is only possible to make calls to interior buildings from the
general entrance door panels when their door panels are not in use. If
an attempt is made to make a call to a busy interior door panel, a number
of telephone tones will indicate that the channel is busy and LED of the
general entrance door panel will blink for 3 seconds.
-The call lasts for 45 seconds. If the call is not answered within
45 seconds, door panel LED
-To establish communication, lift the handset of the telephone and door
panel LED will illuminate.
making modifications to
-Connection will last for 90 seconds or until the handset is replaced. When
communication has finished, door panel LED will turn off and the
channel will be freed.
-To open the door, press the door release button during the call
or communication processes: one press will activate the door release
for 3 seconds and LED will also illuminate for 3 seconds.
DESCRIPTION
D
escription of the T-540 Uno SE telephone.
Digital telephone for the Uno system with button and coded door panels.
Handset.
a.
b.
Speaker grille.
c.
Microphone hole.
d.
Subjection hole.
D
escription of the connection terminals.
on the
HZ- :
.
– , + :
.
D :
on
.
A :
F
unction button
During call reception and communication processes, it
enables the door release to be activated, regardless of
the position of the handset.
In standby position and with the handset off the hook, a call is made to
Continued overleaf
the main guard unit.
will turn off and the channel will be freed.
M
b
d
a
c
e
Telephone cord connectors.
e.
f.
Function button.
g.
Hook switch.
_
HZ-
+
D
A
Door bell button input.
.
Negative, positive (18Vdc power supply).
.
Digital communication.
.
Audio communication.
.
INSTALLATION
2
C
onnecting and fixing the telephone to the wall.
Avoid dusty or smoky environments or locations near sources of heat. The
telephone can be fixed to a universal embedding box or directly to the wall.
Open the telephone by inserting a flat
screwdriver into the slots and gently pry
open as shown in the drawing.
To fix directly to the wall, drill two 6mm
holes at the specified positions and use
6mm wall plugs and Ø3.5 x 25mm
screws.
Pass the cables through the cable holes and connect
them to the connector. Close the telephone as shown
in the drawing. Once the telephone is closed,
connect the handset using the telephone cord and
place it on the hook.
WIRING DIAGRAM
T-540 Uno SE
f
g
+ _
A
D
T-540 Uno SE
e
+ _
A
D
M
= Master.
10
1
*
Place this power supply as
close as possible to the first
telephone.
FA-Plus/C or FA-Plus
SEC
PRI
~
~
+ +
-
-
CV2
Mains
IMPORTANT:
For further information about the door panel, sections, distances, wiring diagrams, etc.,
see the T632 Plus P/T user manual. https://doc.golmar.es/search/manual/50122328
"
"
3
T-540 Uno SE
+ _
A
D
T-540 Uno SE
+ _
A
D
Access panel
CN3
M
9
8
7
6
3
4
2
5
SW2
SW1
CN1
CV1
- +
+
-
D
A
A
V
V
Mes h
V
V
out
in
in-
in+
out+
out-
DC
lock release
Publicidad
