General Cares - alfatest Multijet Pro Manual Del Usuario

11.0 - GENERAL CARES

SAVING TEST FLUID
To avoid spillage and wastage of the test fluid, here are some helpful tips:
- When unplug the hose, keep it elevated for a few moments to allow the return of the fluid remaining in the hose.
- Always remains fluid on accessories (flutes etc. ...), try to disassemble the injectors on a container where it can
capture the fluid or do it directly in the tubes.
CLEANING AND CARE
The Multijet PRO is manufactured with materials resistant to contact with fuels and water, to maintain the good
look , use mild soap and water to clean and finish the procedure with silicone for plastic surfaces.
In case of spill fluid on the equipment l clean it immediately.
ENVIRONMENT
TEST AND CLEANING FLUID
Never dispose on raw sewage. These fluids contaminate our water. No waste disposal in public sewers or
household waste. Proceed as recommended disposal / orientation of the supervisory body of local public
environment.
Remember: You can pollute the water you drink!
MANUALS AND PACKAGING
The materials used in packaging (cardboard, plastics, foam and metal) and manuals (paper and staples) are
recyclable. Do not dispose of roads or on regular trash. Search for points of collection. The environment will thank
you.
PARTS
The Multijet is composed of metals (iron, copper, etc..), plastic, rubber and glass. Easily recyclable materials.
At the end of life of this equipment, drop it on the appropriate place (recycling companies).
MULTIJET PRO
41