koban KEH10-300 Manual Del Usuario página 24

KEH10-300
Hand Ratchet Crimping Tool
CAUTION：
When die is not installed in the tool, please do not operate the tool to avoid
damaging the tool.
Please check the ram whether in place or not after using. Avoiding inner spring tired
and cannot return.
This tool is non-insulated. Please turn off the power while working and wear protect
equipment.
Please note the wire whether can be pressed in its crimping range before pressing.
While pressing, cleaning, and inspecting, please do not approach the pressing area
to avoid any damage.
Do not aim people while operating.
Fixed Handle
Able to rotate
with 180
o
Movable Handle
2
Die
www.grupotemper.com