monolith Extra Montaje página 10

monolith EXTRA
3 b) Fitting the left side section
3 c) Attaching the left side section
Aligning left side section
4
approximately
10
Place element carefully on the stove.
Ensure that the distances at top
and bottom of the side section
are the same.
Now slowly slide the side section down-
wards.
Also check that both guide
rails are attached.
If the element is at a slight angle or is
mounted too low, you can adjust it using
the setting screws at the bottom.
Ensure that the side section is
not screwed too far upwards.
English