monolith Extra Montaje página 11

monolith EXTRA
5 a) Fitting the right side section
5 Attaching the right side section
Aligning right side section
6
approximately
Place element carefully on the stove.
Ensure that the distances at top
and bottom of the side section
are the same.
Now slowly slide the side section down-
wards.
Also check that both guide
rails are attached.
If the element is at a slight angle or is
mounted too low, you can adjust it using
the setting screws at the bottom.
Ensure that the side section is
not screwed too far upwards.
English
11