Klarstein 10030822 Manual Del Usuario página 13

6. Hold up the hood, 16 M4*10 big flat screws will be used to connect the hood body into angle iron, see pic 6.
7. Put the extendable pipe on the outlet,see pic.7.
8. After ensuring everything is ok, put down the hook and the external chimney, then the installation is com-
plete, see pic 8.
Important Hints on Installation
• Please ensure the installation area is clean or free of debris before installation.
• Do not share the air ventilation tube with other usage such as gas tube, warmer tube, etc.
• The ventilation tube has a flexibility of ≥120° from the beginning point until the connections to the external wall.
• Please ensure the extractor the effectiveness of the operation level after the installation.
13