Elta 2954 Manual Del Usuario página 8

2954 9/12/06 5:05 PM
CONNECTIONS
POWER CONNECTION
Only connect the power cable to the AC outlet.
LOUDSPEAKER JACK L/R
When you want to use external loudspeakers, connect then to the LOUDSPEAKER JACKS (12),
which can be found on the back of the machine. This machine should not be connected to
loudspeakers which have an impedance of less than 8 ohm, otherwise the machine can be damaged.
External loudspeakers are always activated together with the built-in ones.
AUX OUTLET
To connect the record player to a hi-fi system or an amplifier, please go about it in the following
manner. Connect the AUX OUTLET (13) of the record player to the AUX OUTLET of a hi-fi system or
amplifier. Use a designated audio cable. Turn the Speaker/Aux switch (11) to the Aux position to
activate the sound output through the AUX outlet. When the Speaker/Aux switch (11) is in the
Speaker position, sound with be emitted through the built-in and external (if connected) loudspeakers.
GENERAL
ON/OFF BUTTON (5)
VOLUME REGULATOR (2)
FUNCTION SELECTION SWITCH (3)
TUNER
1. Press the ON/OFF SWITCH (5) to turn on.
2. To select the desired frequency, turn the FUNCTION SELECTION SWITCH (3) to the desired
frequency band.
3. Press the FREQUENCY REGULATOR (7) to set the desired station.
4. Regulate the volume with the LOUDSPEAKER REGULATOR (2).
TIPS FOR OPTIMAL RECEPTION
FM: The receptor has an FM wire antenna on the backside of the encasing. This antenna should
be completely unwound for optimal reception.
AM: The machine has a built-in beam antenna. Turn the machine to find the position for the most
optimal reception.
08.
Page 08
– Press the button to turn the machine on or off. The
operation display (6) will light up when the machine is
turned on.
– Controls the loudspeaker volume.
– Select the desired source
AM: AM radio
FM: FM radio
Auto-stop ON: record player with activated auto-stop. The
record motor will automatically turn off when the tone arm
is near the middle of the record.
Auto Stop OFF: Turntable with deactivated auto stop. The
disc motor does not stop automatically, in order to be able
to play discs with overlength.