Setting The Time - Bench KH 2205 Instrucciones Para El Manejo

SNOOZE
Operate the SNOOZE
8 minutes.
After 8 minutes, the alarm is reactivated. To switch off
the alarm entirely, set the ALARM On/Off switch

SETTING THE TIME

· To set the full hour hold the Time Set button
Hour button
indicated on the display.
· To set the minutes hold the Time Set button
Minute button
indicated on the display.
PROJECTION
To correctly project the time on a wall or on the ceiling
the swivelling projection element has to be turned to the front
and the room has to be darkened accordingly.
1. Set the Projection On/Off switch
2. Turn the projection element as requested. The time will
be projected to the desired point. Projection distance approx.
2 metres.
3. Adjust the clarity of the projection with Focus
BACKGROUND LIGHT FOR DISPLAY
AND PROJECTION
Operate Snooze
projection for around 10 seconds.
button to interrupt the alarm for
simultaneously until the current hour is
simultaneously until the current minutes are
once to activate the display light and time
GB
to ON.
12
to "OFF".
and the
and the
.