Setting The Unit; Main Function - Mark MOVILED 512 Instrucciones De Usuario

EN

4. Setting the unit

4.1Rear Panel
1 Display: To show the various menus and the selected functions
Button:
2 MENU
3 UP
4 DOWN
5 ENTER
6 Mains input: Connect to supply mains power.
7 DMX input: For DMX512 link, use 3/5-pin XLR plug cable to input DMX signal.
8 output: For DMX512 link, use 3/5-pin XLR plug cable to link the next unit.

4.2 Main Function

To select any functions, press MENU button until the required one is shown on the display.
Select the function by ENTER button and the display will blink. Use DOWN and UP button to
change the mode. Once the required mode has been selected, press ENTER button to
setup . Back to the functions without any change press MENU button. The main functions
are shown below:
MOVILED 512
To select the programming functions
To go forward in the selected functions
To go backward in the selected functions
Enter submenu
User Manual/Manual de uso P 3