STEP 3:
Connect the v-blades of
the 2 upright assemblies
together using 2 M10 x 20
mm bolts (7) and 2 M10
nyloc nuts (19). Ensure that
the v-blades of the left and
right assemblies overlap as
shown.
6
longer
left
STEP 4:
Connect a front leg (15) to
each of the uprights using 2
M6 x 40 mm bolts (11) and
2 M6 nyloc nuts (8). The legs
are inserted in the slot in the
bottom of the uprights and
the bolts passed through
the 2 vertically aligned holes
in each upright and the
corresponding holes in the
ends of each leg.
Ultimate Sawhorse
longer
right