The Ultimate Connection - RCA RV-9968 Guía De Usuario

connecting auxiliary components

the ultimate connection

Should you choose to utilize your new receiver to its fullest potential by running all your audio components
through it, you will need purchase additional connectors. How many and what kind is purely situational.
The following is a complete description of all the jacks on the back of the receiver and how they can be utilized
to provide greater enjoyment. Remember when connecting audio and video cables that, in addition to being
color-coded for connection accuracy, RIGHT jacks always connect to RIGHT jacks and LEFT to LEFT, but IN jacks
connect to OUT jacks and OUT jacks connect to IN.
NOTE: Please be advised the jacks are given generalized names and locations. Your TV/VCR/cable box/satellite
receiver/ etc. might have a different configuration of jacks with different names. The diagrams below are
outlined in the simplest possible detail.
Step 1: Connecting your
satellite/cable receiver
Connect the "OUT" jack on your cable/satellite
receiver box to the "IN FROM ANTENNA" jack on the
back of your VCR.
Then connect the "OUT to TV" jack on the back of
your VCR to the "CABLE/ANTENNA" jack on the back
of your TV.
VCR
IN
TV CD TAPE VCR
IN IN IN OUT IN
L
R
AUDIO
IN
OUT
VIDEO OUT IN
14
AUDO
RECEIVER
VIDEO
MONITOR
OUT OUT
OUT
IN FROM ANT
L
OUT TO TV
R
CABLE
BOX
VCR
IN
OUT
VIDEO
TV
STEP 2: Connecting
your VCR to the receiver
Using video cables, connect the video VCR "IN" and
"OUT" jacks on the back of your receiver to the "OUT"
VCR
and "IN" video jacks on the back of your VCR.
Using audio cables, connect the right and left "IN" and
CH3
"OUT" audio VCR jacks on the back of your receiver to
CH4
the right and left "IN" and "OUT" jacks on the back of
your VCR.
IN
OUT
OR ANTENNA
IN FROM ANT
CH3
L
CH4
R
OUT TO TV
IN OUT
VIDEO
INPUT
R
OUT AUDIO
CABLE /
L
ANTENNA