Sunny Health & Fitness SF-T4400 Manual Del Usuario página 23

WINDOW DISPLAY
SPEED: Displays the current speed (The speed range on this treadmill is 0.5-9 MPH).
When setting PROGRAMS, the speed is programmed in intervals; PROGRAMS are from P1-P9.
TIME: Displays the time elapsed (0:00-99:59 MINS). If the time reaches 99:59, the treadmill will stop
smoothly and display "End" then automatically reset to 0:00 after 5 seconds. When in Countdown Mode, it
will count from the setting time to 0:00. When the clock reaches 0:00, the treadmill will stop smoothly and
display "End" then automatically reset itself after 5 seconds.
DISTANCE: Displays the distance traveled (0.0-99.9 MILES). When the clock reaches 99.9, it will reset to
0.00 and begin counting again from 0.0. When in Countdown Mode, it will count down from the setting
data to 0.00. When it reaches 0.00, the machine will stop smoothly and display "End" and automatically
reset to the initial setting after 5 seconds.
CALORIES: Displays the number of calories burned (0 to 999). When the count reaches 999, it will reset
and start back from 0 again. When in Countdown Mode, it will count down from the setting data to 0.
When it reaches 0, the treadmill will stop smoothly and display "End" and automatically reset to the initial
setting after 5 seconds.
PULSE: Displays the runner's heartbeat per minute (50-200 BPM). The runner must place both hands
over the pulse sensors located on the handles for the system to calculate the runner's pulse.
PROGRAMS
TIME(MIN:SECOND)
SPEED(MPH)
DISTANCE(MILE)
PULSE(BPM)
CALORIE(KCAL)
Initial Default Value
0:00 10:00
0.5 0.5
0.00 1.00
P N/A
0 50
22
Set Range Display Range
0:00－99:59
5:00-99:00
0.5-9 0.5-9
0.00－99.9
0.50-99.9
N/A 50-200
0－999
10-999