Axis M1145 Serie Manual Del Usuario página 17

AXIS M1145 Series
3.
Note
Make sure the light sensor is not covered. This could affect its
performance and lead to false day/night shifts.
Focus & Zoom
Focus and zoom should only be configured when installing or reinstalling
the product.
To set focus and zoom:
1.
2.
3.
4.
5.
Note
• Changing the zoom level moves the focus position. Focus should
always be adjusted after changing the zoom.
• Movements in front of the camera should be avoided during
automatic focusing.
On the Advanced tab, focus can be adjusted manually:
1.
2.
Check that the indicator LEDs indicate the correct conditions.
See LED Indicators, on page 11.
Install the camera as described in the Installation Guide.
Go to Video > Focus & Zoom.
On the Basic tab, set the zoom level using the slider. The
buttons < and > move the zoom position one step in either
direction. The buttons << and >> move the zoom position in
multiple steps in either direction.
Click Perform auto focus to focus the camera automatically.
If more adjustments are needed, go to the Advanced tab.
Click Open iris to open the iris to its maximum position.
This gives the smallest depth of field and provides the best
conditions for focusing.
Focus is set in the Focus window. Use the mouse to move
and resize the focus window.
17