Using The Remote Control - Sony TRINITRON KV-27FS13 Manual De Servicio

Using the Remote Control

Button
1 MUTING
2 SYSTEM OFF
3 TV/VCR
4 ANT (antenna)
5 PICTURE MODE
6 SLEEP
7 JUMP
8
9 RESET
0 VOL (volume)
qa CODE SET
qs POWER
qd FUNCTION
qf Picture in Picture
(PIP)
qg TV/VIDEO
qh DISPLAY


The remote control shown on page 14 (RM-Y181) is for KV-27FS17,
KV-27FV17, and KV-32FS17. Your remote control may not look like the one
illustrated.
Using the Remote Control and Basic Functions
Description
Instantly turns off the sound. Press again or press
to restore sound.
Powers off all Sony equipment at once, (may not
work with older equipment).
Press when you are finished using a VCR and you
want to switch to the TV input. Your VCR power
will remain on.
Press to change the VHF/UHF input to the AUX
input (KV-27FS17, KV-27FV17, KV-32FS17 only).
Cycles through the available Video Mode settings.
Turns the TV off automatically in approximately
15, 30, 45, 60, 90, or 120 minutes. Cancel by
pressing until SLEEP OFF appears.
Alternates between the last two channels selected
with the buttons.
0 9
Cycles through available Steady Sound settings,
(see page 24).
Press to return to factory settings while in an on-
screen menu.
Press when you want to adjust the volume.
Use to program your remote control to operate
connected video equipment, (see page 37).
Press when you want to turn connected
equipment on and off.
Press when you want to control connected
equipment with your remote control.
Operates PIP feature. To use the PIP feature, see
page 18.
Cycles through available video inputs.
Press once to show current time, (if set) and
channel number. Press again to turn DISPLAY off.
(continued)
15