Información De Servicio Para Eeprom - LG XA12-A0 Manual De Servicio

INFORMACIÓN DE SERVICIO PARA EEPROM
1. Push Remote control '2' key and Front 'STOP' at the same time for 5 seconds.
• VFD: If released before 'Write OK' shows, EEPROM option does not change.
• LED: If released before 'UP OK' shows, EEPROM option does not change.
2. When entering in version setting mode, Option number can be changed by pushing left and right navigation
keys in circulation.
3. When entering in version setting mode, following option settings can be changed by pushing up or down
navigation keys.
4. When entering in version setting mode, all keys (except navigation key and enter key) works normal, but
FLD shows option setting info. continuously.
5. When Option setting is done, push ENTER key then FLD displays 'WRITE OK'.
6. Then, to change to E2P CLR status push Remote '2' key and Front 'STOP' at the same time, and set
power off, then option settings are done successfully.
Copyright © 2007 LG Electronics. Inc.Todos los derechos reservados.
Sólo con fines de capacitación y mantenimiento
MODEL : XA12
NAME
OPT 0
OPT 1
OPT 2
OPT 3
OPT 4
- 1-7 -
HEX
82
08
C0
00
00
Sólo para uso interno de LGE