Kenwood BLP40 Manual De Instrucciones página 5

2 Screw the blade assembly onto
the goblet – ensuring the blade
assembly is fully tightened
Refer to the graphics on the
underside of the blade unit as
follows:
- unlocked position
- locked position
3 Put your ingredients into the
goblet.
4 Put the filler cap in the lid.
5 Fit the lid to the goblet and turn
clockwise to lock.
6 Place the blender onto the power
unit with the handle situated to the
right hand side and lock by turning
clockwise until you hear a "click"
.
2
The appliance will not work
l
if the blender is incorrectly
fitted.
7 Select a speed (refer to the
recommended usage chart).
blender hints
To blend dry ingredients - cut into
l
pieces, remove the filler cap, then
with the appliance running, drop
the pieces down one by one. Keep
your hand over the opening. For
best results empty regularly.
Processing spices such as
l
Cloves or Cumin seeds is not
recommended as may taint,
scratch or damage the plastic
parts.
When making mayonnaise, put
l
all the ingredients, except the oil,
into the blender. Then, with the
appliance running, pour the oil into
the filler cap and let it run through.
Thick mixtures, e.g. pâtés and dips,
l
may need scraping down. If the
mixture is difficult to process, add
more liquid.
to use your multi mill
(if supplied)
.
1
Use your multi mill for milling nuts,
coffee beans and purees.
1 Put your ingredients into the jar j.
Fill it no more than half full.
2 Fit the sealing ring d into the
blade unit e - ensuring the seal
is located correctly in the grooved
area.
Ensure that the seal is fitted
l
correctly.
3 Turn the blade unit
down. Lower it into the jar, blades
down
lock.
4 Place the mill onto the power unit
and lock by turning clockwise until
you hear a "click"
5 Select a speed or use the pulse
control.
hints
Baby food/purees - allow cooked
l
food to cool to room temperature
before processing in the mill.
Processing spices such as
l
Cloves or Cumin seeds is not
recommended as may taint,
scratch or damage the plastic
parts.
5
e
. Turn anti-clockwise to
3
.
4
upside