Battery Exchange - Indoor Cycling ANT+ Manual De Instrucciones

BATTERY EXCHANGE

BATTERY EXCHANGE AND RESETTING OF CONSOLE:
• The symbol will appear in the upper right
corner of the display when the batteries need
to be replaced.
To change the batteries, or to reset the ANT+
console in order to resolve any issues to the
functioning of the ANT+ console, please
proceed as follows:
• Use a screw driver to remove the ANT+ console
from its support bracket.
• Remove the batteries of the ANT+ console.
• Press any button on the front of the ANT+
console for at least 10 seconds.
• After RESET reinsert the (new) batteries.
• Test the functionality of the ANT+ console
before re-attaching it to its support bracket.
ANT+ CONSOLE Copyright by Indoorcycling Group GmbH 2013 | www.indoorcycling.com
BATTERY EXCHANGE
BATTERY EXCHANGE AND RESETTING OF CADENCE
TRANSMITTER:
To change the batteries of the cadence
transmitter or to reset the cadence transmitter,
please proceed as follows:
• Use a screw driver to remove the cadence
transmitter from the bike/KRANKcycle frame.
• Remove the batteries from the cadence
transmitter.
• Wait for at least 30 seconds before inserting
the (new) batteries.
• Test the functionality of the cadence
transmitter before re-attaching it to the bike/
KRANKcycle frame.
015