Technical Data; Noise Emission Specifications; Vibration Specifications; Scope Of Supply - Mafell A10 M Traducción Del Manual De Instrucciones Original

2.3 Technical data

Model
Voltage
Speed level 1
Speed level 2
Torque (soft)
Torque (hard)
max. diameter chuck
min. diameter chuck
Max. drill diameter:
Steel
Wood
Weight

2.4 Noise emission specifications

Noise emission values determined according to EN 60745-1 and EN 60745-2-5:
A10 M
Measuring inaccuracy
The values stated are emission levels. Although there is a correlation between emission and imission level, it
cannot be reliably derived from this whether additional precautions are necessary. Factors influencing the
current immission level existing at the workplace comprise the duration of exposure, the room characteristic,
other source of noise, etc. such as e.g. the number of machines and other adjacent machining operations. In
addition, the permissible immission level may differ from country to country. This information is nevertheless
suitable for providing the machine user with an improved assessment of the hazard and risk.

2.5 Vibration specifications

The typical hand-arm vibration is less than 2.5 m/s
The measuring inaccuracy is 1.5 m/s

2.6 Scope of supply

Cordless drill driver A10 M complete with:
1 cordless screwdriver
1 quick-release chuck
1 rechargeable battery 10 M 22 (2.0 Ah)
1 rechargeable battery 10 M 43 (4.0 Ah)
1 charger
1 angle attachment
1 screwdriver bit PZ2
1 belt clip
1 operating manual
1 folder "Safety Instructions"
v
rpm
rpm
Nm
Nm
Ø mm
Ø mm
Ø mm
Ø mm
kg
Sound power level
70 dB (A)
3 dB
2 .
2
-15-
A10 M
10,8
0-360
0-1400
17
34
10
1
10
22
0,8
Without chuck