Purpose Of This Manual - Tempo Communications MM810 Manual De Instrucciones

Description
The Tempo MM810 Digital Multimeter is a hand-held testing device with the following
measurement capabilities: AC and DC voltage, AC and DC current, frequency, resistance,
capacitance, and duty cycle of logic level signals. It also checks diodes and verifies continuity.
The meter features true RMS AC measurements, a relative zero mode, data hold mode, and an
intelligent automatic power off.
Other specialized capabilities and functions common to all meters include:
• Dual display shows two measurements, such as AC voltage and frequency, at the same time.
• Backlit LCD for reading in dim conditions.
• Beep-Jack™ audible warning alerts the user with a beep and an error message on the LCD if
the test lead is plugged into the mA/μA or A input terminal while the selector switch is not in
the mA/μA or A position.
• Bar graph display, which responds more quickly than the numeric display — useful for
detecting faulty contacts, potentiometer clicks, and signal spikes.
Safety
Safety is essential in the use and maintenance of Tempo tools and equipment. This instruction
manual and any markings on the tool provide information for avoiding hazards and unsafe
practices related to the use of this tool. Observe all of the safety information provided.

Purpose of This Manual

This instruction manual is intended to familiarize all personnel with the safe operation and
maintenance procedures for the Tempo MM810 Digital Multimeter.
Keep this manual available to all personnel. Replacement manuals are available upon request
at no charge at www.TempoCom.com.
Do not discard this product or throw away!
For recycling information, go to www.TempoCom.com.
2