Aux In Mode - Naxa NRC-191 Manual De Operación

BUILT-IN USB CHARGER
1.
Connect the USB plug from the external USB
device to the USB Charger port at the back of
the unit.
2.
Unit should begin to charge.
When charging has completed, please
3.
remove the mobile device from the unit.

AUX IN MODE

Connect the AUX cable from the output jack
1.
of your MP3 player or mobile phone to the
AUX input jack on the Radio.
2. Press the /MODE button twice to access the
AUX input. AUX will be displayed on the
screen.
3.
Adjust the volume on both your MP3 player
or mobile device and on the unit to your
desired level.
Page 10
Power Source
Clock Back up
Audio Power
Impedence of Speakers
Radio Tuner
Radio Band Coverage
Output from USB Charge Port
Output from QI Wireless
Charge Port
Accessories
1 x Owner's Manual
1 x AC/DC Adapter (Input: AC 100~240V, 50/60 Hz, 0.5A
Output: DC---5V, 2000 mA)
Speci cations are subject to change without prior
notice.
DC---5V, 2000 mA
DC---3V, 2 x AAA batteries (Not
included)
0.5W per channel (1W RMS)
8 ohm, 2W
FM
87.5 - 108 MHz
DC---5V, 1000 mA (Max)
DC---5V, 1000 mA (Max)
Naxa Electronics