Naxa NRC-191 Manual De Operación página 9

Radio Station Preset
While in Radio Mode, press and hold the
1.
CLOCK/MEM button as "P01" will ash on the
display.
Press the HOUR/SKIP- or MIN/SKIP- buttons
2.
to select which preset number you want to
store the selected radio station. (P1 - P10)
3. Press the CLOCK/MEM button to con rm and
store.
4.
Once completed with your presets, short press
the CLOCK/MEM button to cycle through the
pre-set stations as they will display as "P01-P10".
5.
Press the CLOCK/MEM then HOUR/SKIP- / MIN/
SKIP+ to cycle through the stored presets.
You can also press the CLOCK/MEM then HOUR/
SKIP- or MIN/SKIP+ buttons to cycle through the
stored presets.
www.naxa.com
BUILT-IN QI WIRELESS CHARGER
1.
Place a Qi supported mobile device on the
center of the charging surface as illustrated
below. The Qi inidicator light will display and
your mobile device should begin charging. your mobile device should begin charging.
2.
When charging has completed, please When charging has completed, please
remove the mobile device from the unit.
Check the mobile device's charging status using
the charging icon displayed on the screen.
Page 9