Never use alcohol, petrol, kerosene or other liquid fuels to light the re. Keep these substances away from the re. Do not
use petrol or chemical origin re-lighters as they can seriously damage the walls of the rebox .
Only use ecological re lighting aids.
During operation, any ammable materials must be placed at least 180 cm from the radiation area (glass surfaces)
3
COMBUSTION CONTROL
Combustion is regulated by inserting the cold handle supplied in the adjustment lever situated at the base of the door (Fig. 6).
Turn it clockwise (-) or counter-clockwise (+) to have a greater ow of combustion air corresponding to a greater combustion
ame
Turn the adjustment lever towards the + symbol to obtain faster combustion; turn it towards the - symbol to obtain slower
combustion; select the desired position (Pos. 1-2-3)
Positions 1-2-3 correspond to the certi ed power values.
4
FIREPLACE MAINTENANCE
To be carried out at least once a year, or every 40 quintals of wood.
During the maintenance operation, the technician must:
• thoroughly clean the ues (a diagram indicating the path of the exhaust smoke is attached in FIG. 7 and FIG. 8 (smoke
de ectors dismantling sequence with O2 Ring). After cleaning, re t the de ectors and the O2 Ring (if featured in the model
purchased) in reverse order.
• check the condition of all the seals and make sure they work properly
• check the condition of all internal components and make sure they are clean
• make sure the smoke outlet connection is sealed and clean
• make sure that the stove is working properly
5
INSPECTION AND MAINTENANCE SCHEDULE
Grate
Ash pan/compartment
Glass
Door seals *
Smoke exhaust duct*
By a specialised technician.
(*)
(a)
At least once a year or every 4 tonnes of burnt fuel.
EVERY
IGNITION
X
X
X
cod. 004777080 MBL - 08/2018 - Palazzetti - PN - Italy
1
YEAR
(a)
X
X
X
25