Leroy Merlin YL-2A15BT Manual De Instrucciones página 68

Please pull up the plug when you don't use it.
Please stop using the machine when its power cord or plug is damaged; please ask
professional electrician or supplier to replace it.
Notes
Don't use the damaged power cord, plug, casing or control panel.
Don't curl the power cord and also please don't touch sharp
instruments.
If you don't obey the instructions on user's manual, the machine may
be not able to be maintained.
7. Operating instructions / Drawings
The buttons and indicators on the control panel and their function:
1、POWER‐Switch ON/OFF: Control the power ON/OFF.
2、HUMIDITY—Humidity setting button: You can set four target ambient humidity
40%RH、50%RH、60%RH,continuing humidity(CONTINUE).
3、TIMER—Timing button: Setting time of switching off: 2H、4H、8H.
4、POWER—Power indicator lamp: Lightening indicates the machine is working; Blinking
indicates that the temperature and humidity sensor tests the ambient temperature is
≤0℃ or ≥40℃ or the NTC on temperature and humidity is cut off or short circuit.
5、WATER FULL INDICATOR—Water full indicator lamp: The indicator lamp will lighten
when the water tank full and the machine will switch off.
6、DEFROST INDICATOR—Defrosting indicator lamp: Lamp lightening indicates the
machine is defrosting; Lamp blinking indicates the temperature and humidity
sensor on evaporator is cut off or short circuit; Defrosting indicator lamp
blinks two times and lightening 1 second indicate (copper NTC),testing the
copper's temperature is ＞40℃.
7、HUMIDITY INDICATOR—Humidity indicator lamp: Indicates the setting humidity data.
8、CONTINUOS INDICATOR—Continuing dehumidifying indicator lamp: Indicates the
machine is working in the continuing dehumidifying mode; if the lamp
blinking, it indicates the temperature and humidity is not be connected well,
but the machine is working in the condition of continuing dehumidifying.
GB
67