NOTE: The appliance will only function if all parts have been properly assembled and the lid
has been properly locked in place with the safety clamp.
1.
Wash your fruit and/or vegetables and remove any inedible stems, skins, pits, or peels
from your fruits and vegetables.
2.
Cut them into pieces that fit into the feeding tube. (Fig. 7)
3.
Make sure the Juice Jug (L) has been placed under the spout.
4.
Switch the appliance ON by turning the Control Knob (G) to setting 1 (low speed) or 2
(normal speed).( Fig.8)
a.
b.
ASSEMBLING (CONT.)
HOW TO USE
Speed 1 is especially suitable for soft fruits and vegetables such as
watermelons, grapes, tomatoes, cucumbers and raspberries.
Speed 2 is suitable for all kinds of fruits and vegetables.
5