•
Unplug the unit from the outlet when it is not in use, before putting on or taking off
parts, and before cleaning.
•
Always wash parts immediately after using the machine to avoid staining.
•
Clean the Motor Base (I) with a damp soapy cloth or sponge. Wash the Pusher (A), Lid
(C), Juice Collector (E), Pulp Container (F), Grater/Filter (D), the Juice Jug(L) and Juice
Jug Lid (K) by hand in warm soapy water and rinse thoroughly.
•
To remove pulp from Grater/Filter (D), hold Grater/Filter (D) bottom side facing up
under running water and gently scrub with the soft cleaning brush provided. Flip over
and scrub other side as well under running water. (Fig. 11)
NOTE: DO NOT REMOVE THE SCREWS FROM THE GRATER/FILTER (D);
carefully push the Juice Collector (E) up and off of the Motor Base (I) to release it
along with the Grater/Filter (D). (Fig. 10)
•
Dry all parts thoroughly before re-assembling for storage or for use.
•
Do not operate the unit without the Pulp Container (F), Grater/Filter (D), Lid (C) or the
Juice Jug (L) and Juice Jug Lid (K) in place.
•
DO NOT REMOVE THE PULP CONTAINER (F) OR LID (C) FROM THE MOTOR BASE
(I) WHILE THE JUICE EXTRACTOR IS IN OPERATION.
•
Remove all pits (peaches, plums, etc.), large seeds (melons, etc.), and stems before
placing food into the Feeding Tube (B). Thick peels (oranges, lemons, and grapefruit)
should also be removed. Items such as these may damage the unit and change the
taste of the juice.
•
KEEP ALL BODY PARTS AND UTENSILS OUT OF THE FEEDING TUBE (B) WHILE
THE UNIT IS IN OPERATION TO PREVENT THE POSSIBILITY OF SEVERE INJURY
OR DAMAGE TO THE UNIT.
** THE GRATER/FILTER (D) SHOULD BE WASHED WITH WARM SOAPY WATER AND
DRIED THOROUGHLY TO PREVENT ANY RUSTING.
CAUTION: TO PROTECT AGAINST RISK OF ELECTRICAL SHOCK, DO NOT SUBMERGE
THE MOTOR BASE (I) IN WATER OR ANY OTHER LIQUIDS.
NOTE: DO NOT CLEAN ANY PART OF THE JUICE EXTRACTOR WITH ABRASIVE SOAPS,
DETERGENTES, OR MATERIALS. DO NOT PUT ANY PART OF THE JUICE EXTRACTOR INTO
THE DISHWASHER OR BOILING WATER.
Hand in the appliance to an official collection point for recycling at the end of its life. By
doing this you will help to preserve the environment. (Fig.12)
SAFETY PRECAUTION:
IT IS IMPORTANT TO ALWAYS VISUALLY INSPECT THE GRATER/FILTER FOR UNUSUAL
WEAR. IF YOU NOTICE ANY RUSTING, CRACKS OR THAT THE BASKET IS BEGINNING
TO LOSE ITS SHAPE, IMMEDIATELY REFRAIN FROM USING THE UNIT. CONTACT THE
MANUFACTURER FOR A REPLACEMENT GRATER/FILTER.
CARE AND CLEANING
7