Kit Assembly - Metra Electronics 95-8248B Instrucciones De Instalación

Double DIN radio provision
1. Attach the (2) panel clips to the
radio housing.
Note: The factory panel clips
may be used if preferred.
2. Attach the radio to the brackets
with the screws supplied with the
radio. (Figure A)
3. Locate the factory wiring
harness in the dash. Metra
recommends using the proper
mating adapter from Metra or
AXXESS. All accessories, switches,
and especially air bag indicator
lights must be plugged in before
reconnecting the battery or cycling
the ignition. Test everything for
proper operation.
4. Mount the radio/bracket assembly
into the dash opening.
5. Snap the radio trim panel over the
new radio and reassemble dash in
reverse order of disassembly.

Kit Assembly

(Figure A)
95-8248B
3