Kit Assembly; Iso Ddin Radio Provision - Metra Electronics 95-8202 Manual De Usario

ISO DDIN radio provision

1. If applicable, remove the trim ring from the aftermarket radio.
2. Attach the factory mounting brackets and the ISO DDIN trim
plate brackets to the radio with the screws supplied with the
radio.
Note: Remove locating pins from factory brackets using a
grinder tool.
3. Locate the factory wiring harness in the dash. Metra
recommends using the proper mating adapter from Metra or
AXXESS. Test the radio for proper operation.
4. Reassemble the dash in reverse order of disassembly.

KIT ASSEMBLY

Style of factory brackets
may differ
19
REV. 12/5/2019 INST95-8202