Handset Settings; Register A Handset - AEG Thor15 Guía De Usuario Rápida

14
M
• Press then enter the time information according to 12 HR or
24 HR format. The time will be in the format you set.
M
• Press then enter the year information. The last two digits of
the year will flash for year input.
M
• Press then enter the date information according to DD-MM-
YY or MM-DD-YY format. The date will be in the format you set.
M
• Press to confirm.
9.2

Handset Settings

9.2.1 Alarm
You can use this phone to set an alarm clock. When an alarm is set,
<ALARM ICON> displays on the LCD. When the alarm time is
reached, the <ALARM ICON> and "ALARM ON" flash on the screen.
The handset also rings for 45 seconds.
M
• Press
and
M
• Press and
M
• Press and
M
• Press to confirm.
9.3

Register a Handset

Your handset is pre-registered to the base station. Up to five handsets
can be registered to a a single base station.
If for some reason, the handset is not registered to the base station,
REGISTER will be displayed on the handset screen, register your
handset following the process below.
• Press and hold
base station is entered into registration mode.
M
• Press and
M
• Press and you are requested to enter the 4-digit system PIN.
• Enter the 4-digit system PIN and press
NOTE
If the handset registration is successful, the handset will automatically
be allocated the next available handset number. This handset number
is shown in the handset display in standby mode.
.
to select HS SETTINGS.
.
to select ALARM.
.
to select ON or OFF.
on the base station for about five seconds, the
.
to select REGISTRATION.
M
to confirm.