Daga cálido confort Instrucciones De Uso página 16

ENGLISH
the level 1 temperature lights up. The heating pad is now ready to
operate.
From this point on, the instructions for use depend on the particular
control model.
2-kEY CONTROL
Press the temperature selection key several times selecting one of
the 4 optional levels in order to set the desired temperature level.
The regulator operates continuously at the temperature level that has
been pre-set with the LED lit up on the regulator control indicating
the selected temperature.
The maximum operation time is 8 hours, after which an automatic
safety stop is activated, displaying the last temperature used which
flashes on the screen. The pad will stop producing heat when in this
state.
If you wish to deactivate this function, press the central key to allow
you to once again select the desired temperature.
4-kEY CONTROL
Press on the " " y " " keys to set the desired temperature level choo-
sing one of the 4 optional levels.
The regulator operates continuously at the temperature position that
has been pre-set with the LED lit up on the regulator control indi-
cating the selected temperature. The maximum operation time is 8
hours, after which an automatic safety stop is activated, displaying
the last temperature used which flashes on the screen. The pad will
stop producing heat when in this state. If you wish to deactivate this
function, press the central key to allow you to once again select the
desired temperature.
Press the right-hand key until the desired option has been set to se-
lect one of the desired pre-set operation times (45/90 mins). The
green LED indicates the time selected at all times (each time you
press the key). This allows you to select the automatic disconnect
time. Once the selected time has elapsed, the pad is automatically
turned off, and the temperature leds that have been turned off are
displayed on the screen indicating that it is not heating while the se-
lected time remains on.
If you wish to deactivate this function, press any key that will allow
you to select the desired temperature and operation time again.
Press the "comfort" key once to activate the Comfort program at any
time in the 4-key control L and L2 models. The program automatica-
lly changes the temperature over 90 minutes, with the Comfort and
temperature program remaining lit up at all times. After this time,
the control automatically turns off the pad. If you wish to deactivate
this function while the program is running, press the "Comfort" key
again, which will allow you to select the desired temperature and
operation time again.
16
Manual Almohadillas I.indb 16 23/07/14 10:07