FAR FV816 CI Manual De Instrucciones página 42

ENGLISH
Spraying:
Press the Spray button to spray the water using
the spray nozzle. At the same time, make sure
that there is always enough water in the water
tank.
Steam ironing:
1. To use the steam, turn the steam button
to the minimum position and set the
temperature knob to the position "..." or
"MAX".
2. Once the indicator is off, turn the steam
button to the appropriate setting and the
steam is projected and you can start ironing.
Turbo Steam function
Adjust the temperature knob to the position
"..." or "MAX" and then press the TURBO
steam button. A large amount of steam is then
projected by the soleplate.
Dry ironing:
Turn the steam button to its minimum position
and set the temperature knob to the required
setting, then you can start ironing.
GB-8
Automatic cleaning:
First fill the water tank, then plug the iron into
a mains socket. Adjust the temperature knob to
its maximum position and wait for approximately
3 minutes. Then press the automatic cleaning
button for approximately 1 minute and powerful
steam and hot water are projected to clean the
boiler. Use this function once every two weeks.
List of symbols
Anti-drip system:
This iron is equipped with an anti-drip function:
The iron automatically ceases to produce steam
when its temperature is too low to prevent water
dripping from its soleplate.
Anti-scale function:
The anti-scale function filters the minerals
contained in the water to avoid the formation of
scale in the boiler.
ENGLISH
GB-9