Minix NEO N42C-4 Guía De Usuario página 5

Overview
Power LED - The LED glows blue when NEO N42C-4 is on.
Power Button - To power on the NEO N42C-4, press and hold
the power button for 1-2 seconds until the power LED glows.
To power off the NEO N42C-4, press and hold the power
button for 8 seconds.
3.5mm Audio Jack + S/PDIF Port - Connect an external audio
input/output device such as microphone or AV receiver etc.
Gigabit Ethernet Port - Connect an Ethernet cable for
wired internet access up to 1000Mbps.
DC 12V Power-in Jack - Connect the included 12V power
adapter. NEO N42C-4 requires approx. 1A to operate,
however the included power adapter provides 3A to ensure
support for other external devices attached to NEO N42C-4,
such as an external hard drive.