Rosewill RMS-SWM01 Guia De Instalacion página 8

RMS-SWM01 Wall Mount Installation Guide
Step 6 :
Mark the holes of the wall mount set on the concrete wall. (Hole distance: 152mm)
Step 7 :
Drill Ø 3/8" (10 mm) holes about the depth of 60mm on the wall.
Step 8 :
Insert B-C anchors into the holes.
Step 9 :
Screw the wall mount set on the wall with B-A bolts and B-B washers.
# Install 2 on wood wall.
Drill Ø 7/32" (5 mm) holes about the depth of 60mm on the wall. There is no need to use B-C.
B-C
2
Wall
B-B
B-A
6