Wall Control Operation; Testing Your Fan - Craftmade Ellington ANT54AV5WCR Guia De Instalacion

11. Wall Control Operation.

ON/OFF slider switch - turns wall control ON or OFF
HI button - turns fan to HIGH speed
MED button - turns fan to MEDIUM speed
LOW button - turns fan to LOW speed
FAN OFF button - turns fan OFF
LIGHT button - (for use with optional light kit--sold
separately) turns light ON/OFF when
pressed once; dims light when pressed
and held down
REV button - used to REVERSE blade direction (fan
must be set on low before reversing
blade direction)

12. Testing Your Fan.

It is recommended that you test fan before
finalizing installation. Locate ON/OFF slider switch
on wall control and set to the ON position. Test
light and dimmer function (if applicable) and then
test fan speeds with the different fan speed
buttons. If the wall control does not operate all of
the fan functions, refer to "Troubleshooting" section
to solve any issues before contacting Customer
Service.
Fan must be set on LOW before setting the fan in
reverse. Reverse blade rotation to recirculate air
depending on the season. A ceiling fan will allow
you to raise your thermostat setting in summer and
lower your thermostat setting in winter without
feeling a difference in your comfort.
page 9