Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
CHARGER OPERATION
CHARGING A HOT BATTERY PACK
When using a tool continuously, the battery pack may become hot. A hot battery pack may be
placed directly onto the charger port but charging will not begin until the battery temperature cools
to within acceptable temperature range. When a hot battery pack is placed on the charger, the green
LED will turn on and the red LED will be off. Remove the battery for 30 minutes and allow to cool
then place back on charger.
CHARGING A COLD BATTERY PACK
A cold battery pack may be placed directly onto the charger port but charging will not begin until
the battery temperature warms to within acceptable temperature range. When a cold battery pack is
placed on the charger, the green LED will turn on and the red LED will be off. When the battery pack
warms the charger will automatically begin charging.
LED FUNCTIONS
BATTERY PACK
GREEN
RED
LIGHT
LIGHT
Without battery pack
With battery pack
GREEN
RED
LIGHT
LIGHT
With battery pack
GREEN
RED LED
LED
ON -
OFF
SOLID
ON -
OFF
SOLID
OFF
ON -
SOLID
ACTION
Ready to charge the battery pack.
Remove battery.
NOTICE: If fuel gauge on battery is not full
then the battery is too hot to charge, let bat-
tery cool for 30 min and charge again.
Battery is charging.
7
Publicidad
Tabla de contenido
