Maintenance; Care & Cleaning; Troubleshooting - Defiant 84045 Guía De Utilización Y Cuidado

Maintenance

Periodically check the connection from the solar panel to the light. Ensure this plug is correctly inserted.
□ Some seasonal adjustment of the solar panel may be required to offset shorter charge days during the winter.
□ Ensure the solar panel is free from any obstruction such as trees or buildings.
Care and Cleaning
□ The solar panel should be cleaned on a regular basis. This will ensure the 48 LED Solar Motion light charges consistently.
□ To clean the solar panel, use a damp cotton cloth. Never use any abrasive materials or cleaning products.
□ The lens of the LED light should also be cleaned with a damp cotton cloth. This ensures a clear illumination.

Troubleshooting

Problem
Why does the 48 LED Solar Motion Light not illuminate at night?
Why does the 48 LED Solar Motion Light come on during the day?
Why does the 48 LED Solar Motion Light come on for no reason?
What should I do if the 48 LED Solar Motion fails to turn off?
What should I do if the 48 LED Solar Motion Light appears to
"strobe" or flash?
Will decorative or street lights have an effect on the 48 LED Solar
Motion Light's ability to operate?
Does the solar panel require direct sun to charge?
Where should the solar panel be mounted?
Where can a new battery for the 48 LED Solar Motion Light be
purchased?
□ Adjust the LUX dial clockwise to allow the motion light to turn on
at a lower darkness level and compensate for potential ambient
light. See Steps 3 & 4 under the Operation section of this manual.
If this does not fix the issue, refer to the last solution of this
troubleshooting guide to reset the light.
□ Adjust the LUX dial counter-clockwise to trigger the light at a higher
ambient darkness level. See Steps 3 & 4 under the Operation section
of this manual.
□ If this occurs, decrease the sensitivity setting by adjusting the
SENS dial counter clockwise.
□ The motion light should be used in the AUTO position. See Step 2
under the Operation section of this manual to identify how to
use the ON/OFF/AUTO switch.
□ Turn the 48 LED Solar Motion Light to the "OFF" position. Allow
the battery to recharge for two full sunny days. At the end of the
second day, turn the light to the "AUTO" position. See Steps 3
& 4 under the Operation section of this manual to confirm the
light's LUX dial settings. The 48 LED Solar Motion Light should
now work as required.
□ Yes, the sensor of the 48 LED Solar Motion Light is light sensitive.
For nighttime usage, ensure no other light activates the motion
sensor.
□ Mount the solar panel in a position that will enable the maximum
amount of light to be absorbed. In the Northern hemisphere this
is usually south facing. Refer to Planning Installation on page 3.
□ Mount the solar panel in a position that will enable the maximum
amount of light to be absorbed. In the Northern hemisphere
this is usually south facing. Refer to Planning Installation on
page 3.
□ A replacement battery can be purchased on www.homedepot.com.
Search for internet #: 205223951.
9
Please contact 1-866-308-3976 for further assistance.
Solution
HOMEDEPOT.COM