Exercise Band Instructions - Sunny 012S Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

5
10
11
Your stepper is set at its highest stepping height. Turn the knob counter-clockwise "-" to decrease the
stepping range.
NOTE: Height range will decrease with each counter-clockwise turn.

EXERCISE BAND INSTRUCTIONS

Unscrew the hook nut located on the band until the hook is open as shown in the
1.
picture below.
Attach the band hook onto the pedal hook and screw the hook nut closed until the
2.
pedal hook is secured with the hook nut.
Assembly is done.
3.
ASSEMBLY INSTRUCTIONS
STEP 1
Remove the Main Frame (No. 10) from the box. Lift
one Pedal (No. 5) up with your hand and ensure that the
cable is properly secured around the Pulley (No. 9) as shown
in the picture
9
STEP 2:
Turn the
right until it reached its end point.
STEP 3:
20
Attach the Exercise Bands (No. 20) to the pedal hooks
located at the front of the left and right pedals as shown in the
picture.
The assembly is complete!
:
.
Knob (No. 11) clockwise " + " all the way
6

Publicidad

Tabla de contenido
loading

Tabla de contenido