Spypoint LINK-S-DARK Guía De Instalación Rápida página 13

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 122
STARTING YOUR CAMERA
1. Turn the camera ON.
2. The screen will light up and display "Network Search".
This search may take a few minutes.
3. Once the cellular network has been found, the signal strength
will appear as bars at the top of the screen.
4. From your screen, using the navigation buttons, select
"Start Camera", then choose the desired operating mode
(PHOTO, TIME-LAPSE, OR VIDEO) and press OK.
Start camera
Detection test
View
Settings
5. Once the mode is selected, the test light on the front of the
camera will blink red for 30 seconds to allow you to leave
the area without being photographed or filmed.
6. The camera is now ready to take pictures or videos and to
transmit them to your application the next time you transfer
them.
Note that the signal bars may not be identical to those on
your other cellular devices, as there is no industry standard
nor practical way to label the dBm values at a specific number
of bars.
HOME
SETTINGS
(Con guration)
Photo
Photo
(Con guration)
Time lapse
Time-lapse
(Con guration)
Vidéo
Video
(Con guration)
Général
General
13

Publicidad

Tabla de contenido
loading

Tabla de contenido