General Maintenance; Replacing The Batteries - Google Nest Protect Guia Del Usuario

General Maintenance

Cleaning your Nest Protect
Nest Protect has been designed to be as maintenance
free as possible, but you should keep it clean. As with
any smoke alarm, dust buildup on the outside or inside
of Nest Protect can stop it from working properly.
To clean Nest Protect:
1. Remove it from the wall or the ceiling (turn
counterclockwise until it comes off the backplate).
2. Wipe the outside with a clean, slightly damp cloth.
Don't use any soaps or solvents.
3. Place Nest Protect on a soft, dry cloth with the button
facing down. Open the battery compartment door
and remove the batteries. Remove the screws and lift
off the back. Be careful to not lose the screws.
4. Gently vacuum the inside. Make sure to clean
all the way around the mesh sides of the smoke
chamber (the large metal circle).
Note: Never use detergents or solvents (like glass
cleaner) on your Nest Protect and do not spray air
fresheners, hair spray or other aerosols near it. Do not
get water inside the alarm or paint over it.
16

Replacing the batteries

Nest Protect uses six AA Energizer® Ultimate Lithium
batteries (L91). These batteries can be purchased at
your local retailer.
1. Twist Nest Protect counterclockwise until
it disconnects from the backplate.
2. Open the battery door on the
back of Nest Protect.
3. Replace the batteries. Align
1
the + positive and - negative
2
ends with the markings in the
3
battery compartment.
4. Close the battery compartment. Do not force the
door closed.
5. Push Nest Protect onto the backplate and turn
it clockwise until you feel it grip.
6. Press the button twice.
Servicing
If your Nest Protect needs servicing, first contact
our support team at g.co/nest/support to get a return
number and shipping information.
1
2
3
1 4
2 5
3 6