Publicidad
Idiomas disponibles
Idiomas disponibles
Tiiwee Home Alarm Starter Kit
User manual
1 x A1 Siren including 2 AAA Batteries
2 x window sensors, each with 1 12V, 23A battery, adhesive tape and screws
1 x remote control including one CR2032 battery
Tiiwee Home Alarm Kit XL
User manual
1 x A1 Siren including 2 AAA Batteries
4 x window sensors, each with 1 12V, 23A battery, adhesive tape and screws
2 x remote control including 1 CR2032 battery
Tiiwee Home Alarm Kit XLPIR
User manual
1 x A1 Siren including 2 AAA Batteries
2 x window sensors, each with 1 12V, 23A battery, adhesive tape and screws
2 x remote control including 1 CR2032 battery each
1 x PIR Motion Detector including 3 AAA batteries
Pre-Configuration of Tiiwee Home Alarm Kits
Your system is ready for use. The window sensors in the kit are paired to zone 1. If your kit
contains a PIR Motion Detector, it is paired to zone 2.
Operating principle
The Tiiwee Home Alarm system is based on 433MHz technology. Sensors emit a wireless
signal at 433MHz when they are triggered. The A1 Siren unit is a receiver for these 433MHz
signals and will emit a sound when a signal is received.
Siren: The A1 Siren produces either a chime or an alarm sound depending on its setting.
Sensors can be paired to any of the 4 zones. This allows you to perfectly adapt the system
to your home situation.
Sensors in general: Each sensor transmits a signal at 433MHz that is composed of a specific
combination of digital 0- and 1 bits. This is the signal signature of that unique sensor. The
siren recognizes sensors by their signal signature.
Door & window sensors: These sensors have 2 parts. A small magnet and a sensor. When
the magnet is moved away from the sensor, a 433MHz signal is transmitted. The siren will
now sound the alarm or chime sound.
3
Publicidad
