bluefin Hoverboard Manual De Instrucciones página 4

CHARGING
YOUR BOARD!
1
Ensure the board is switched o .
2
Before charging carefully ensure that none of the pins on the charging port of the
board are bent or damaged in any way.
3
Line up the groove on the charging cable with the groove on the charging port on the
board.
4
Carefully insert the charging cable into the charging port on the board. Ensure the
grooves are aligned and that the pins are inserted correctly.
5
The light on the charging adapter will be red once the board is charging.
6
Once the board is fully charged the light on the adapter will turn green.